Material: ABS and Metal
Hose Length: 80 cm
Max Pressure: 110 PSI
Bottle Capacity: 500 ml
Bottle High: 20.5 cm
1 x Car Brake fluid replacement tool
1 x Instructio
How to use:
1.Take away the dirty brake fluid from the tank.
2.Put in the new brake oil.
3. Connect the hose between the equipment and the brake branch pump,then Start the car let engine running.
4.Twist the screw to be loose ,but not completely. Then, open valve to start siphoning the fluid out. Please turn off the valve after screwing when it finish.
5.Our tool fit for universal cars , you can use the tapered spout which is offered in the package avoid air leaking.
1.Please lift the tool over the brake pump to ensure it work properly.
2.The switch handle used for Vacuum of this item, Pressure can be controlled by the compressor.(you can convert high pressure into the pressure)
3. Each compressor is not the same, what pressure is more suitable for you to use, you can slowly from low to high pressure to debugging.
- Effectively replace oil/empty air, simple work, used for fluid extraction, such as brake oil, clutch oil, power steering oil, engine oil, gear oil, coolant, water, etc.
- Working requirements: compressed air 20psi≤P≤110psi, the height of the pulling liquid increases with the increase of air pressure. Air inlet: 1/4″ quick coupler male plug
- One can do all the work for brake system bleeding effectively. Make the work more clean, no dirty oil stained on floor
- Quick change the brake oil, clutch oil, and the direction of the oil, become very simple.
- Suitable for car, motorcycle, truck, engineering vehicle and other machinery that need to be extracted liquid